Tamperproof (Pre-set) Thermostat FTO 011
Contact breaker/NC(red casing)for regulating heaters or for switching signal devices when temperature has fallen below the minimum value. The contact opensWnen temperatu re is rlslna.
Tamperproof (Pre-set) Thermostat FTS 011
Contact maker/NO(blue casing)for regulating filter fans，heat exchange rs，coolingdevices or for switching signal devices when temperatu re limit has been exceeded.The contact closes when temperau re is rising.
Tamperproof (Pre-set) Thermostat - NC
Opens on temperature rise (red module housing) - for regulating heaters or for switching signal devices when temperature has fallen below the minimum value.
Tamperproof (Pre-set) Thermostat - NO
Closes on temperature rise (blue module housing) - for regulating filter fans, heat exchangers, cool-ing devices or for switching signal devices when temperature limit has been exceeded.
Heaters and cooling equipment can be switched independently from each other with a temperature offset as opposed to the usual SPDT/change-over contact.
|
Sensor element |
Thermostatic bimetal |
|
Contact type |
snap-action contact |
|
Contact resistance |
＜20mΩ |
|
Service life |
>100,000 cycles |
|
Max. switching capacity |
240V AC, 5 (1.6)A |
|
120 VAC, 10 (2)A |
|
|
DC 30W |
|
|
Max. inrush current |
AC 10A |
|
EMC |
acc to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3 |
|
Connection |
2-pole terminal for 2.5mm², torque 0.8Nm max. |
|
Mounting |
clip for 35mm DIN rail, EN 60715 or for exit filter EF 118 Series |
|
Casing |
plastic according to UL94 V-0, light grey |
|
Dimensions |
47 x 33 x 33mm |
|
Weight |
Approx. 23g |
|
Fitting position |
variable |
|
Operating/Storage temperature |
-20 to +80°C (-4 to +176°F) / -45 to +80°C (-49 to +176°F) |
|
Protection type |
IP20 |
|
Art. No. |
Contact type |
Switch-off temperature |
Switch-on temperature |
|
01160.0-00 |
Contact breaker (NC) |
+15°C / +59°F (± 5K tolerance) |
+5°C / +41°F (± 5K tolerance) |
|
01160.0-01 |
Contact breaker (NC) |
+25°C / +77°F (± 5K tolerance) |
+15°C / +59°F (± 5K tolerance) |
|
|
|
Switch-on temperature |
Switch-off temperature |
|
01161.0-00 |
Contact maker (NO) |
+50°C / +122°F (± 6K tolerance) |
+40°C / +104°F (± 7K tolerance) |
|
01161.0-01 |
Contact maker (NO) |
+60°C / +140°F (± 6K tolerance) |
+50°C / +122°F (± 7K tolerance) |
|
01161.0-02 |
Contact maker (NO) |
+35°C / + 95°F (± 6K tolerance) |
+25°C / +77°F (± 7K tolerance) |
GET A QUOTE
