Isolator Switch

HGLD automatic change-over switch(ATSE)integrates switch andlogic control. Thus it is not necessary to provide external controller. This truly electrome chanically intergrated automatic change-over sw

HGLD automatic change-over switch(ATSE)integrates switch andlogic control. Thus it is not necessary to provide external controller. This truly electrome chanically intergrated automatic change-over sw

7specifications of HGL load isolation switch from 63A to 3150A: Basic model of modularized design, possesses three poles, and fourpoles (3 poles+on and off neutral pole). It is suitable for electric i

7specifications of HGL load isolation switch from 63A to 3150A: Basic model of modularized design, possesses three poles, and fourpoles (3 poles+on and off neutral pole). It is suitable for electric i

HR17 series fuse type isolating switch,rated insulating voltage AC800V,rated operaing voltage 690V.400V,rated frequency 50Hz,the rated current 160A-630A mainly used as power switch,isolating switch an

HGLZ-63A-3150A.The load isotaiom switch is suitable for the changeover of two sets of low voltage electric circuit or the changeover of 2 sets of load devices or safety isolation.Mode of operation:Dir

WOT Series 4Pole 40A - 125A Load Switch Disconnector. All contact materials are copper plated silver alloy with two separate contact surfaces. The distance is large. In the "O" position, you can use three locks to lock the handle at the same time, and reliably avoid misoperation.

This series of disconnector is suitable for various applications. It can be used in motor control center, and is used for main switches in various equipments and machines. It provides a single pole to 8 pole switch, and can be equipped with a pistol handle or directly installed handle. It can be installed in the power distribution cabinet, and can provide side operation switch, wide distance switch and transfer switch, bypass switch, mechanical linkage and other combination switches.

WOT Series Electrical 160A 200A 250 Amp 3P Isolator Switch. The parallel double breakpoint contact has self cleaning effect. All contact materials are copper plated silver alloy with two separate contact surfaces.

Industrial WOT 4Pole 160A 200A 250A Load Isolation Switch. Load isolating switches are widely applied to distribution system and automation system in building, power, petrochemical and other industries.

WOT 315A 400A Load Isolator Switch Disconnector. Load isolating switches are widely applied to distribution system and automation system in building, power, petrochemical and other industries. The shell made of glass fiber reinforced unsaturated polyester resin has good flame retardancy, dielectric properties

High Voltage WOT 630A 800A Load Isolating Switch. Load isolating switches are widely applied to distribution system and automation system in building, power, petrochemical and other industries. The acceleration mechanism with instantaneous release of spring storage achieves fast connection or separation