Overview
DJR Heater,is the development and production of the heat dissipation electrical heater based on national standard GB/T-15470-1995. The product adopts a special aluminum extrusions of 6063-T5 for conducting the radiator. in order to increase the cooling area，and designs small ripples on each heat sink. It is internal uses the quality Ni80Cr20nickel-Chromium alloy resistance wire for heater，seiko produced. The product has small size，light weight，big heat dissipation area and long service life and the erminal device is safe and reliable，not easy to damage. As for the overall design，it has reasonable structure and beautiful appearance.mainly used in high and low voltage switch cabinet，centrally installed cabinet，ring counter，terminal box,box-type substation and other power equipment for moisture-proof，anticondensation，dehumidifition to improve the working envlronment temperature and all the spaces need dehumidification and heating. Supporting the use of KT0011 series condensation temperature division monitor can realize the dehumidification and warming automation.The heater has the features of good heating effect，safe and reliable usage，long working time without failures,easy installation and univers ally used for the domestic various models of heater.
|
Working Voltage |
110VAC/220VAC/380VAC/220VDC/380VDC |
|
Operating Frequency |
50Hz |
|
Insulation resistance |
50Ω |
|
Dielectric strength: |
＞2000V |
|
Continous working time |
＞5000 hours |
|
Rated power : |
50-300W |
|
Art.No. |
Operating voltage |
Heating capactiy |
Dimensions (mm) |
Mounting Holes (mm) |
|
DJR-1 |
220V |
50-150W |
132×85×23 |
55 |
|
DJR-2 |
220V |
150-400W |
163×100×28 |
55 |
|
DJR-B-1 |
220V |
50-150W |
144×75×24 |
55 |
|
DJR-B-2 |
220V |
150-400W |
155×100×23 |
55 |
|
DJR-C-1 |
220V |
50-150W |
148×75×21 |
55 |
|
DJR-C-1 |
220V |
50-150W |
148× 75×21 |
55 |
|
DJR-C-2 |
220V |
150-400W |
210×104×26 |
55 |
|
DJR-C-2 |
220V |
150-400W |
210×104×26 |
55 |
GET A QUOTE
