Have any questions?
CONTACT US
WST07 Touch screen floor heating thermostat

WST07 Touch screen floor heating thermostat

Advantage

> Clean production environment

> Full automatic testing with various tests

> Standardized production process with trained workers

> Low failure ratio and 24-month warranty

> Strong R&D and engineering support

Request a Quote  
WST07 Touch screen floor heating thermostat

WST07 Touch screen floor heating thermostat
for floor heating,water system and electric heating
Load: 3A/16A/30A
TUV CE

 

Introduction

The WST07AH.Y thermostat is a type of thermostat with large, touchable LCD, which is fit for floor heating, and controlling the actuator for water system and electric heating devices. With our thermostat, you can enjoy a cosy and comfortable living environment.
The WST07AH.Y thermostat touch screen thermostats for heating also with modulating 0-10V and 2-10VDC both 85-250VAc and 24 VAC

 

Application

For the control of warm-water( floor) heating systems and direct electric heating systems used in Commercial buildings, Residential buildings, Light industrial buildings...
The WST07AH.Y thermostat equipped with extremely small junction box and simple installation, is suitable for wall box all over the world.

 

Basic function:

1.Work modes (Heat ,Auto or Vent)
2.Multi. periods programe (5+2/6+1/7)
3.Low temperature protection function
4.Time on and Time off
5.Surveys, display and set room temperature
6.Large, clear, backlit display. easy-to-see and read
7.Memory function:parameters are permanently held in memory and retained during power outages.
8.Guards against the rime function
9.Infrared remote-controlled function(option)
10.Anti-freezing protection

 

 

Temperature range :0 -40 centigrade
Set temperature range:5-35 centigrade
Mounting: mounts directly onto wall or wall-box
Voltage:85-250VAC 50/60Hz 24VAC
Output signal: relay 8A/VOLT. 0-10V 2-10V (INCLUDE 24VDC 80mA)
POWER consumption:0.5W
Accuracy:0.5Celsius
Accuracy displayed:0.1Celsius
Relative humidity: <85% (23 centigrade)
Sensor type:NTC
Display: LCD + Green back lighting
Control mode:heating
Body material: Antiflaming PC
Remote function: YES(optional)
Certification:CE
Dimensions: 86mm X 86mm X 12mm (H/W/D)
Size of display:60mm X 45mm (H/W)
WEIGHT:175G/PCS
Inner box size:100(L)x100(W)X60(H)mm
Output Type: Y:2-10V ( INCLUDE 24VDC/80mA )

 

 

 

 

Message Feedback
If you have any enquiry about quotation or cooperation,please free to email us at Winston or use the following enquiry form,Our sales representative will contact you within 24 hous.thank you for your interest in our products.
News Center
How can I test the foot switch after install?
To test a foot switch after repair, follow these steps:1. Visual Inspection: Check for any visible damage or loose parts. Make sure all components are correctly placed and secured。2. Connectivity Chec
2024-09-27
Can I repair a damaged foot switch myself?
Repairing a damaged foot switch can be a straightforward process if you have some basic knowledge of electrical systems and the necessary tools. Here are some steps you can follow to repair a foot swi
2024-09-27
Winston Exhibition
nverter, maybe everyone knows that there is such a thing and what it is used for, but
2024-04-25
Chinese frequency inverter manufacturer mainly introduced to you what is an inverter
Inverter, maybe everyone knows that there is such a thing and what it is used for, but if you introduce it to others, most of you may not know how to say it. Because there are many things we know in life but don’t understand it. Of course, I believe that people who understand electricity or decoration industries still know about frequency converters. Next, the Chinese frequency inverter manufacturer mainly introduces to you what is an inverter.
2024-04-22

GET A QUOTE

AFFORDABLE PRICE: AS A MANUFACTURER, WE GIVE YOU FACTORY PRICE
Contact Us For Free Sample
×