| Model | SD-60A-5 | SD-60B-5 | SD-60C-5 | SD-60D-5 | SD-60A-12 | SD-60B-12 | SD-60C-12 | SD-60D-12 | SD-60A-24 | SD-60B-24 | SD-60C-24 | SD-60D-24 |
| DC Voltage | 5V | 12V | 24V | |||||||||
| Rated Current | 12A | 5A | 2.5A | |||||||||
| Current Range | 0 ~ 12A | 0 ~ 5A | 0 ~ 2.5A | |||||||||
| Rated Power | 60W | 60W | 60W | |||||||||
| Rippple & Noise | 100mVp-p | 120mVp-p | 150mVp-p | |||||||||
| Voltage ADJ. Range | 4.5- 5.5VDC | 11 - 16VDC | 23 -30VDC | |||||||||
| Voltage Tolerance | ± 2.0% | ± 1.0% | ± 1.0% | |||||||||
| Line Regulation | ± 0.5% | ± 0.3% | ± 0.2% | |||||||||
| Load Regulation | ± 0.5% | ± 0.3% | ± 0.2% | |||||||||
| DC Current | 7A/12VDC | 3A/24VDC | 1.5A/48VDC | |||||||||
| Efficiency | 70% | 73% | 76% | 72% | 72% | 75% | 78% | 74% | 74% | 80% | 83% | 83% |
| Voltage Range | A: 9.2 ~18VDC B: 18 ~ 36VDC C: 36~72VDC D:73-114VDC | |||||||||||
| Setup, Rise, Hold Time | 2.5s, 50ms, ----- at full load | |||||||||||
| Oerload | 105 ~ 150% rated output power | |||||||||||
| Protection type :Fold back current limiting, recovers automatically after fault condition is removed | ||||||||||||
| Over Voltage | 5.75 ~ 6.75V/10% load | 16.8 ~ 20V/10% load | 31.5 ~ 37.5V/10% load | |||||||||
| Protection type : Hiccup mode,recovers automatically after fault condition is removed | ||||||||||||
| Working Temp. | -10 — +60ºC (Refer to "Derating Curve") | |||||||||||
| Working Humidity | 20 — 90% RH non-condensing | |||||||||||
| Storage Temp., Humidity | -20 — +85º C, 10 ~ 95% RH | |||||||||||
| Temp. Coefficient | ± 0.03%/ºC (0 ~ 50º C) | |||||||||||
| Vibration | 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes | |||||||||||
| Safety Standards | Design refer to LVD | |||||||||||
| Withstand Voltage | I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVA | |||||||||||
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC /25ºC /70%RH | |||||||||||
| Dimension | 159*97*38mm (L*W*H) | |||||||||||
| Packing | 24pcs/12.7Kg/0.75CUFT | |||||||||||
GET A QUOTE
