Name: SP-150 AC To DC Single Output Switching Power Supply With PFC Function
Brand: Winston
SKU: 01828
Rating: 4.1 (964 reviews)

SP-150 AC To DC Single Output Switching Power Supply With PFC Function

Advantage

> Clean production environment

> Full automatic testing with various tests

> Standardized production process with trained workers

> Low failure ratio and 24-month warranty

> Strong R&D and engineering support

Request a Quote

OUTPUT
Model	SP-150-5	SP-150-7.5	SP-150-12	SP-150-13.5	SP-150-15	SP-150-24	SP-150-27	SP-150-48
DC Voltage	5V	7.5V	12V	13.5V	15V	24V	27V	48V
Rated Current	30A	20A	12.5A	11.2A	10A	6.3A	5.6A	3.2A
Current Range	0-30A	0-20A	0-12.5A	0-11.2A	0-10A	0-6.3A	0-5.6A	0-3.2A
Rated Power	150W	150W	150W	151.2W	150W	150W	151.2W	153.6W
Ripple&Noise	100mVp-p	100mVp-p	100mVp-p	100mVp-p	100mVp-p	150mVp-p	150mVp-p	250mVp-p
DC Adjustment Range	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%	-5%，+10%
Voltage Tolerance	±2%	±2%	±2%	±2%	±2%	±1%	±1%	±1.0%
Line Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Load Regulation	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%	±0.5%
Setup,Rise,Hold Up Time	600ms,30ms,20ms at full load
INPUT
Voltage Range	85～264 VAC47-63Hz；120～370VDC
AC Current	2.5A/115 VAC1.2A/230VAC
Power Factor	PF>0.93/230VAC,PF>0.98/115VAC at full load
Efficiency	75%	79%	80%	80%	81%	83%	84%	84%
Inrush Current	Cold start 40A/230VAC
Leakage Current	<2mA/240VAC
PROTECTION
Over Load	105%-150%
Over Load	Protection type: Constant current limiting, recovers automatically after fault condition is removed
Over Voltage	110%~135%
Over Voltage	Protection type: Shut down o/p voltage, re-power on to recover
Over Temp.	TSW1(Power transistor) When temp.in 95±5 ℃ shutdown o/p voltagetemp. ＜95±5 ℃O/I auto-recovery.
ENVIRONMENT
Working Temp.Humidity	-10℃~+50℃; 20%~90%RH
Storage Temp.Humidity	-20℃~+85℃; 10%~95%RH
Temp.Coefficient	±0.03%/℃(0～50℃)
Vibration	10～500Hz, 2G 10min./1cycle, period for 60min, each along X, Y, Z axes
SAFETY
Withstand Voltage	I/P-O/P:3KVAC I/P-O/P:1.5KVAC O/P-FG: 0.5KVAC
Isolation Resistance	I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC
STANDARD
Safety Standard	Design refer to UL1950,TUV EN60950
EMCStandard	Design refer to EN55022,EN61000-3-2,-3,EN61000-4-2,3,4,5,6,8,11;ENV50204,EN55024
Dimension	1999950mm（LWH）
Weight	0.75Kg
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
	2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″twisted pair-wire terminated with a 0.1μ & 47μ parallel capacitor.
	3. Tolerance: includes set up tolerance, line regulation and load regulation.
	4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets EMC directives.