Semiconductor heater,Hazardous area heater - Yueqing Winston Electric Co., Ltd.

Product Categories

Have any questions?

DJR Heater,is the development and production of the heat dissipation electrical heater based on national standard GB/T-15470-1995. The product adopts a special aluminum extrusions of 6063-T5 for conducting the radiator.

CREx 020 Hazardous Area Heater

Compact convection heater for use in areas with explosion hazard for prevention of formation of condensation, temperature fluctuations and for protection against frost in transmitter housings, switch cabinets and measuring equipment.

Touch-safe Heater CSF 060 Series 50W-150W

CSF 060 Series Touch-safe Heater

Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air. The surface temperatures on the accessible side surfaces of he housing are kept down as a result of the heater design.

CSK 060 Heater

The heaters are used in enclosures where condensation is to be prevented or the temperature may not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured. The heaters are designed for permanent operation.

Touch-safe Heater CS 060 Series 50W-150W

CS 060 Series Touch-safe Heater

Touch-safe heater for the use in enclosures with electrical/electronical components.The design of the heater supports the natural convection which results in a high air-current of warm air.The surface temperatures on the accessible side surfaces of he housing are kept down as a result of the heater design.

HG 040 Heater

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value. The aluminium profile heater body design has a chimney effect and distributes the heat evenly.

Semiconductor Heater HG140 Series 15W to 150W

HG 140 Series Semiconductor Heater

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature must be maintained above a minimum value. The aluminum profile heater body design has a chimney effect to distribute heat evenly.

HG 240 Series Semiconductor Heater

These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value.The aluminium profile heater body design has a chimney effect and distributes the heat evenly.

Small Semiconductor Heater HGK047 Series 10W to 30W

HGK 047 Series Small Semiconductor Heater

The HGK 047 heaters are used in enclosures to maintain minimum operating temperatures and to help prevent failure of electronic components caused by condensatio